HBQ-230 Blue Gas Fired Molten Aluminium Transfer Ladle Preheating Device
Product Description: Ladle Preheater is generally used for removing the moisture from the ladle to avoid formation of gas/reaction with the liquid metal. It is designed in both Vertical and Horizantal type depending on the size and capacity of the ladle
Gas Fired Preheating Station
1. Introduce
A ladle preheat system is a stand-alone station with a burner, system control center, and movable heater
assembly inside of an insulated cover. The heater and cover assembly is raised and lowered above open ladles.
These systems are typically designed for ladle capacities of one-half to two tonnes. Gas and electric power options
are available, and equipment controls can be customized to customer needs, ranging from advanced temperature
control options to manual controls.
2. Aluminium Transfer Ladle Preheater Description
Aluminium transfer ladle preheater use natural gas or oil or electricity as the fuel, heat the transfer ladle through the
burner on the top of machine to achieve the transfer ladle preheating.
3. Technical Parameters
| Items | Parameters | Remarks | |
| Heating Type | Small; Medium; Big | ||
| Max. Burning Calorific Value | 13x104 Kcal/h | ||
| Heating Temperature | 0-900℃ | ||
| Temperature Control Accuracy | ≤ ±20℃ | ||
| Heating Rate | 0-20 ℃/min Adjustable | ||
| Time to Reach Temperature | 0-60 min | ||
| Heating Temperature Uniformity | ≤50 ℃ | ||
| Lifting Power | Cylinder Driver | ||
| Lifting Stroke | 0-400mm | ||
| Gas | Gas Type | Natural Gas | |
| Gas Pressure | 5000 ±5% Pa | ||
| Gas Flow | ≤ 16 m³/h | ||
| Power | Voltage | 380 V, 3P | |
| Frequency | 50HZ | ||
| Rated Power | 3 KW | ||
| Compressed Air | Pressure | 0.5-0.7 MPa | |
| Flow | ≤ 50 M3/H | ||
Contact Person: Miss. Ally Qin
Tel: 0086 18660151258
Fax: 86-531-88969137
